Ralink Rt5390r 802.11bgn Wifi Adapter Driver 13
the driver supports ipv4 and ipv6. on this driver, the default packet demultiplexing method is still the tso, but the tso is not used by the driver. the driver may need to use the xso which is not supported by this driver. in addition, for this driver, the default packet demultiplexing method is switched on. this driver supports iwlwifi . if you use the iwlwifi, please ensure that the support of your wireless card or your environment has not been disabled.
ralink rt5390r 802.11bgn wifi adapter driver 13
the rt5390r driver supports the ralink rt5390 device. this is a marvell chip with very low power consumption. the chipset is available on the massive number of cheap tp-link usb wireless adapters and some other adapters based on the csr chipset. supported hardware driver version support firmware 1.8 1.7 1.6 1.5 1.4 1.3 1.2 1.1 description this driver supports the ralink rt5390 device. the chipset is available on the cheap tp-link usb wireless adapters and some other adapters based on the csr chipset. as the radio chip is soldered into the device, you need to replace the chip. some vendors had a bad sample of chipsets and solders. if your vendor didn't solder the radio chip, it's definitely a bad sample and you should use another sample for the rt5390 chipset.